Custom stock set for Krieghoff K80 and Model 32 over/under shotguns. Made by Jack Dockwiller of CA. High grade walnut with ornate checkering. This stock set does have some bumps and bruises, but has no major issues, a used but not abused set. Would make a great winter fluff-and-buff project for someone. It’s tough to find a comparable stock to ascertain its exact value since it was a custom stock set, but ballpark guess of replacement cost for this set would be in the $3000-$5000 range. The light wood you can see at the back of the comb cut was the result of a wood plug being fit into the stock. Before the stock had an adjustable comb, it had a mercury recoil reducer installed, and in order to provide a foundation for the comb hardware the reducer had to be removed and a plug fit so the hardware had something to attach to. Not a huge deal, and basically invisible when the gun is in use, only visible when the comb is off, but I figured it bears mentioning. The adjustable comb is four-way adjustable (up/down and left/right) using stainless hardware. The stock also has a Jones recoil pad adjuster installed, as well as a Kickeez recoil pad (pad is a little chewed up, but is fully functional, just not very pretty). At one time, the grip cap had a diamond shaped gold inlay, unfortunately that has been lost, although it would not be difficult to fabricate a brass piece to inset in its place. Length of pull as shown, using a K80 with the adjustable trigger in its middle position, is 12 11/16”, so it is on the short side. This would make an excellent ladies/youth stock, and would also be a prime candidate for a recoil reducer such as a Gracoil, Countercoil, ISIS, ect which would get you back up into the grown man length range. Drop at comb is 1 13/32”, and drop at the pad adjuster is 1 25/32”, so it is a sloped comb in the skeet/field/sporting style. Stock has a right hand palm swell, and a considerable amount of right hand cast . The stock fit right onto a recent vintage K80, and generally speaking Krieghoff parts require little to no fitting when installed, but as with any high end over/under parts, fitting MAY be required, and returns will not be accepted because they don’t drop right on to your gun. If you have any concerns please consult a competent gunsmith for verification of proper fit. The forend includes the rosettes, and the stock includes the stock bolt . I have a boatload more pics if you want them. $900 shipped in CONUS