Putting up for sale my Perazzi back up gun, a very nice ole workhorse Perazzi TM1, 34", just great wood for a standard old Perazzi (best wood I've ever seen on one) they used to ship them with "orange-crate wood" There is a small tight crack by the trigger guard. It’s not going anywhere. There is some pinpoint pitting on the top tang and a little on the ejector. Other than that the normal wear---just a great older model Perazzi, that will last a life time of shooting---Price is 2895.00 shipped to your dealer.
Jeff, as per our phone conversation, "I will take it". Sending you a PM Edit after talking to seller. Since this sale turns out to be “As Is” with no other information or pictures available and no option to return it, I will pass. It is still for sale
Jeff, Check your PM. I will take it as long as both the bore and choke are factory spec. Edit: can’t get the numbers so it is still for sale
If you can’t see the PM please post the, Bore diameter Choke Constriction Picture of the top lever with the gun closed Picture of the breech face Picture of the trigger group, coil spring or flat? Serial number range so I can determine its date of birth Picture of the crack behind the guard Picture of the recoil pad And if you offer the universally accepted 3 day NON firing inspection period Love the looks of the gun. I agree it the prettiest wood I ever saw on a TM1 but without specific info it’s a crapshoot UNLESS you offer the 3 day inspection and return policy. Thanks
Gun is still for sale---Gun works perfectly and will give you many years of good shooting...don't think you will find a nicer TM1 for the money.,, 34 inch unaltered, non ported barrel. Barrel blue is nice and original. Action blue is als good with slight edge wear. Top lever is center to a smidge right. Lots of life left, no new bolt needed. Wood is better figured then most with standard comb. LOP is 14 7/16 inches over pad. The pad is getting hard and could be changed, but is usable. There is a small tight crack by the trigger guard. It’s not going anywhere. There is some pinpoint pitting on the top tang and a little on the ejector. Just a bit but worth mentioning. All serial numbers match. It’s a target crushing machine at a BT-99 price. Still for Sale!