Getting a custom rib built

I'm currently shoot a DeVault 391 conversion. Have the rib raised as high as it can toe and the com is all the way down--The current rib is 7/8" in the back & 3/8" in the front with 4 notches for adjustment-would like a rib that would be 3/4" in back & 1/2" in the front--anyone know a good machinist who could scan my rib and build me a new one

 

635 G contact David Berlet he is a good rib builder. Roger C.

 

How do you want your gun to shoot High or Flat?

 

Want it to shot flat for sporting, the lowest I can get the rib is 70/30

 

Thanks for the reply I see what you are trying to do and the reaso9n. Good luck.

 

Dennis always thought the Mach had to shoot high due to fast trigger. He believed in high shooters for trap

 

I also have an Infinity, the late Dean Debow, said" let me see your gun" and he said" you have to set the Infinity @ 140% high" I did that & the gun vaporized targets like no other gun-- I'm shooting the 391 because I'm still on the mend from back surgery & its 1.3 lbs lighter than my Infinity--which is trap gun. Trying to get into more diversified clay target shooting while I'm on the mend

Forgot to mention I had Briley make an offset choke for the 391 , going to try it out when I get to the range.

 

Bo Elder is the man 606-872-9215 he’s the best , Rob mize said so quality work

 

I will also recommend Bo Elder, he made me a rib for a MX10RS double to shoot lower POI.

 

I will recommend Bo Elder also. He made a rib for my bt99 plus to give me the sight
pitcher I wanted with a higher POI than I could get with factory rib. I have pictures
if you want to see them. High quality work.

Gary

 

Gary can you post the PLUS rib pictures here ??? Larry

 

Larry,
I will try to get some on here tomorrow after church.
Thanks
Gary

 

Thanks Gary. After you post the pictures would you send me a PM w/your PH no.
I need other information. LDS

 

These are the pictures of all the plus ribs in diffrent configurations.

 

Go to Ubanks gun shop they can fix it.