K32 12 gauge skeet barrel (only) 28" with tube set.

Skeet set 410, 28ga, 20ga.all working, think the tubes are fitted Purbaugh. Barrel is standard k32 12 gauge, excellent condition including Americase set to hold tube set. $1950.00 Shipped.

Joe

 

Since the original tubes need to have the ejector removed with each set, I almost exclusively used the 28 gauge tubes but I have a set of Briley's from another k32/k80 barrel that I'll throw in, same price.

 

The skeet barrel locks up tight on my K80.

 

Ttt

 

Reduced $1750.00 shipped.

 

joe, arent the brileys custom fitted to a specific bbl and not interchangable with others? thats the way i remember full length tubes being, unlike companions.

 

Sometimes with a little luck they are interchangeable. I shot a Model 32 for years with subgauge tubes made for another gun.

 

Yes these Brileys came from a different gun/barrel but they seem to work in these barrels fine. I sold the original barrel that came with the Briley tubes and the guy for some reason didn't want the tubes. The bores are very consistent in the k32s I mostly used the Briley 28ga tube set. Sometimes if the tubes are a little loose a little plumber's would help keep them in place, fairly typical to aid in extraction, no big deal. The other set of tubes were fitted to the barrel but extractors are made to fit on the barrel and have to be taken on and off as you changed gauges. A little slow but work well. I added the Briley tubes in the deal sweeten the pot. All brass hulls work the best.

 

I also have a set of Kolar tubes that were fitted to a Browning 625 and working in a 725 Browning. We Mic-ed the bores to check the fit, the couldn't be tighter.

 

joe, check your pms....