I have a Alfermann number 201 that is in real nice shape, it had everything freshened up internally. I have the parts to make it a release and a extra firing pin. Has a rad recoil reducer. Has 2 ribs, one is 60/40 the other one is 90/10 poi I think. No more of these are being made $7000.00 shipped
The guy that builds them (Roger Eubanks)went through it to make sure everything was in a1 shape. Basically a annual. Springs,I think that was the bulk of it
How long is the barrel? Choke, fixed or tubes and constrictions? Picture of the end of the barrel? Length of pull with RAD in its shortest position?
34 inch barrel, fixed full choke, if I remember right I think the lop at shortest is 14 1/4 longest 15 1/4. I don’t have no way to measure constriction in the choke. Roger told me at one time I just don’t remember. If your interested I can come up with everything you need
If it hasn't been altered, the choke will be tuned to extra full. Depending on the barrel, I've heard of ranges from 0.038" to 0.044" and will be for a couple of inches.
It hasn’t been altered in any way except the rad. I almost want to say the choke is .040 but wouldn’t promise
I’m not sure how to answer that question. It is a regular Alfermann 302 made and that’s all the guy that builds them lives about 20 miles from me and he said they are done so there won’t be anymore. They are going to be worth more I think. Parts are still available slso
They made some called a silver dollar special (black receiver) and a few over unders. Not sure if anything else
This is a regular Alfermann, its slightly unique because its a Mohawk; the rib continues across the back of the receiver and finishes at the stock. I'll try and find the build specifics and post them.
